The Erde WHEELBE30204 is used as an outer wheel bearing on several Erde Trailers.

This bearing is of the tapered roller type.  Use in conjunction with Erde WHEELBE30205.

It is used on Erde142, 143, 153, and CH751 trailers.

It is advisable when replacing a wheel bearing to replace both inner and outer bearings at the same time.

Before any new bearings are fitted ensure that the hub internal surfaces and the spindle are clean and free from dust and burrs.

It is usual to fit the bearings into the hub first, Push each side into place and fit the sealing ring.

Pack with grease and slide the completed assembly onto the spindle.

Tighten the wheel nut to seat the bearings and then back off a little, so that the wheel turns freely with no lateral movement.

The hub-cover is replaced by lightly tapping it into place after first packing the hub with grease.